By Des Davies, Top Gear Motor Services. VEHICLE: FORD FOCUS 3 ECOBOOST 1.0 M1DD 2015 MILEAGE: 27,361. FAULT: P0137 SENSOR CIRCUIT LOW VOLTAGE. SYMPTOMS: CHECK ENGINE LIGHT ON WITH NO OTHER ISSUES. The car had previously been diagnosed by the Ford dealers, who had replaced a post-lambda sensor and within a few weeks, the check engine light had keiser1080. I am living in Belgium, and usually speak french (sorry for my english). I found this forum by searching "Ecoboost 1.0 water leaking". Two years ago after an engine overheating i replaced the degas hose by the same model. But a week ago i heard the radiator spinning after à 500m trip, i found the water tank nearly empty. 6. Name: Unknown. Ford Model: Focus MK3 Zetec EcoBoost. Ford Year: 2013. UK/Ireland Location: London. Posted October 16, 2021. Hi all, I'm new here but I've looked around and haven't found another post with this issue. So the vehicle is a Focus Mk3 Zetec 1.0 EcoBoost (Manufac: 2013) Probably that you may have air conditioning on , extra fan speed all draining the battery. Only takes a little bit extra draw of current to prevent the stop start not to work.

Focus ST Line 2.0 diesel. 18" black alloys, sat nav, drivers assistance pack, reversing sensors, power fold mirrors, auto lights & wipers, Cruise control .privacy What are the most common problems with a used Ford Focus hatchback? Engine failures Cars built between 2012 and early 2013 with the 1.0-litre Ecoboost have been known to leak coolant, which can A battery is a heavy weapon if it comes loose during an impact. Mk4 Focus ST 2.3 EcoBoost Ford Year: 2019 I’ve had exactly the same problem on my 2014 ford Budding Enthusiast. 10. Name: Julian0476. Ford Model: Focus. Ford Year: 2018. UK/Ireland Location: Cardiff. Posted March 17, 2023. My ford focus st line 1.0 ecoboost seems to be idling roughly obviously the engine is shaking slightly, an also it only revs up to around 4000. First you should try to reset the APIM module. This can either be done using a suitible diagnostic system or by removing the correct fuse or disconnecting the battery for about 15 minutes. If resetting the APIM module does not solve the problem the APIM module must be considered defective. vH8Dt.

ford focus 1.0 ecoboost battery problems